S-Type (X200) V6-3.0L (2000)
12. Detach with care the seat backrest cover.
13. Carefully remove the retaining trim rings.
Installation
1. To install, reverse the removal procedure.
NOTE: When installing the backrest cover start to install the cover from the center line and work outwards.
Rear Seat Bolster Cover
Removal
1. Remove the seat rear bolster. See: Seat Back/Service and Repair
2. Detach the seat backrest latch.
CAUTION: Make sure not to snag or damage the rear seat backrest or the trim panels when the rear seat backrest is removed.