S-Type (X200) V6-3.0L (2000)
/v6-3.0l/Page-353003.png)
Apply an 8 mm dot of silicone gasket and sealant or equivalent meeting Jaguar specification WSE-M4G323-A6 to the sealing surface on the
engine block and front cover joint.
2. Install the oil pan to transmission housing bolts.
3. Install the front crossmember. For additional information, refer to Front Suspension.
Vehicles with Automatic Transmission
4. Attach the bracket for the automatic transmission oil cooler tubes.
All Vehicles
5. Attach the power steering tube bracket.
