S-Type (X200) V6-3.0L (2000)
Control Module Pin Out Information
This information is included to assist the user in identifying and locating components, connectors and grounds.
When network data is required for the understanding of a particular circuit, the user is directed to the SCP Network. See: Computers and Control
Systems/Information Bus/Description and Operation
Where circuits include a Control Module, Pin Out information is provided with values for "active" and "inactive" states. The values listed are
approximately those that can be expected at the control module connector pins with all circuit connections made and all components connected and
fitted. "Active" means a load is applied or a switch is ON; "inactive" means a load is not applied or a switch is OFF. This information is provided to
assist the user in understanding circuit operation and should be used FOR REFERENCE ONLY.
Reference Symbols
NOTE: In the examples, an 'X' is used where a number would appear on an actual Figure.
Reference Symbols
Control Module Pin Symbols
Wire Color Code Identification
N
Brown
B
Black