jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Keyless Entry - Can't Lock Vehicle Using Remote Fob|Page 3556 > < Yaw Rate Sensor|Service and Repair|Page 3544
Page 1
background image

Ignition Switch Lock Cylinder: All Technical Service Bulletins
Keyless Entry - Can't Lock Vehicle Using Remote Fob

NUMBER: JTB00106
(ISSUE 1)

MODEL:
S-TYPE
X-TYPE
XJ
XK

DATE: 5 JUNE 2008

SECTION: 501

Unable to Lock Vehicle With Remote Key Fob - Repair Procedure

AFFECTED VEHICLE RANGE

CONDITION SUMMARY:

Situation:

An issue has been identified where the vehicle will not lock while using the remote key fob but does lock while using the key. Certain models may emit
an audible or visual warning to identify the vehicle has not been locked. This condition may be caused by the shutter in the ignition barrel becoming
'stuck'.

Action: 

In the event of a customer concern of the above, follow the Repair Procedure outlined below to modify the ignition key insert switch.

PARTS:

No parts necessary

TOOLS:

Refer to Workshop Manual (GTR) for special tools (if required)

Keyless Entry - Can't Lock Vehicle Using Remote Fob|Page 3556 > < Yaw Rate Sensor|Service and Repair|Page 3544