S-Type (X200) V6-3.0L (2000)
Stabilizer Bushing: Service and Repair
Action:
To remove/install the front stabilizer bushings, follow the Service Instruction outlined
below.
1. Open hood and install fender protection covers.
2. Raise vehicle on ¡Ætwin post¡Ç ramp.
3. Remove the radiator splash shield.
4. If installed, displace and remove the generator cooling duct.
5. Detach and reposition the water control valve and mounting bracket.
6. Remove the stabilizer bar securing bolts (Illustration 3).
7. Displace and remove the stabilizer bar mounting bracket upper caps.