S-Type (X200) V6-3.0L (2000)
securing bolt (arrow, Illustration 1), so the washer locates against the bend in the jack operating handle.
9.
Check that the wheel nut wrench is correctly stored as illustrated.
10.
Reinstall the spare tire, washer, retaining nut and support pad.
11.
If applicable, reinstall the foam surround followed by the cover.
12.
Close the lid of the luggage compartment.
Parts Information:
DESCRIPTION
PART NUMBER
QTY
Retaining bolt, jack
XR86103
1
Warranty Information:
Service Action S115
VEHICLE
SUMMARY DESCRIPTION
TIME
CODE
ALLOWANCE
S-TYPE
AT
Replace jack retaining bolt
0.15 hrs.
2000 MY
-without drive-in/out time
VIN L021 23-L06274
(performed with another repair.)
Model codes 6100,
6300,6310
S-TYPE
AV
Replace jack retaining bolt
2000 MY
-with drive-in/out time
0.15 hrs.
VIN L021 23-L06274
(only repair performed)
Model codes 6100,
6300,6310
NOTE:
Always perform a DCS claim search first to determine whether this service action has been performed on this vehicle. The warranty selection under
the vehicle inquiry will give a listing of all claims against the vehicle. If S115 appears in the fault code field, do not perform this service action.
CLAIM SUBMISSION PROCEDURE:
Warranty summary codes have been assigned to this service action in order to simplify claim submission. The dealership will be reimbursed the parts and
labor time allowance as indicated.
DCS DEALERS
Submit claims using the appropriate summary code for the vehicle model and work performed. Follow standard campaign submission procedures.
NON-DCS DEALERS
Submit claims on the Recall Campaign Summary form W-25. Enter the appropriate summary code for the vehicle model and work performed in the
Repair Code column. Do not use the W-1 warranty claim form.