S-Type (X200) V6-3.0L (2000)
/v6-3.0l/Page-865002.png)
Installation
1. NOTE: Check the rear axle pinion flange, rear axle housing and pinion stem splines for damage.
Install the pinion oil seal.
2. Install the oil seal dust cover.
3. Install the pinion flange.
4. Install the pinion flange nut.
Tighten the pinion flange nut to the noted force required when removed.
Tighten the pinion flange nut to a further 10%.
5. Install the driveshaft.
