S-Type (X200) V8-4.0L (AJ28) (2001)
/v8-4.0l_(aj28)/Page-1465001.png)
Power Door Lock Actuator: Service and Repair
Front Door Lock Actuator
Front Door Lock Actuator (76.37.74)
Removal
1. Remove the door glass.
2. Place the regulator guide to one side.
1. Remove the glass retaining nuts.
2. Place the regulator guide to one side.
3. Remove the exterior handle.
4. Remove the door actuator screws.
5. Remove the door actuator.
1. Disconnect the actuator electrical connector.
2. Remove the door actuator.
Installation
1. To install, reverse the removal procedure.
