S-Type (X200) V8-4.0L (AJ28) (2001)
/v8-4.0l_(aj28)/Page-358003.png)
1. NOTE:
The piston and piston pin are a matched pair. Do not mix up the components.
Measure the piston pin diameter.
^
Measure the diameter in two directions.
^
If the values are not to specification, install a new piston and a new piston pin.
Piston Pin to Bore Diameter
Piston Pin to Bore Diameter
1. NOTE:
The piston and piston pin form a matched pair. Do not mix up the components.
Measure the diameter ofthe piston pin bore.
^
Measure the diameter in two directions.
^
If the values are not to specification, install both a new piston and a new piston pin.
Piston Ring End Gap
Piston Ring End Gap
