S-Type (X200) V8-4.0L (AJ28) (2001)
/v8-4.0l_(aj28)/Page-369003.png)
7. Remove the main seals from the valve cover.
1. Remove and discard the outer seal.
2. Remove and discard the two seals from around the spark plug apertures.
3. Remove the seal for the VVT solenoid.
Installation
1. NOTE: Make sure all components are clean.
Install the new main seals to the valve cover.
1. Install the new outer seal.
2. Install the two new spark plug aperture seals.
3. Install the seal for the VVT solenoid.
