S-Type (X200) V8-4.0L (AJ28) (2001)
Air Door Actuator / Motor: Service and Repair
Actuator - Heater Core
Removal
1. Disconnect the battery ground cable.
2. Remove the instrument panel.
3. Remove the actuator.
1. Disconnect the actuator electrical connector.
2. Remove the actuator.
Installation
1. To install, reverse the removal procedure.
NOTE: New door actuator assemblies have the actuator in mid-position. If reinstalling an actuator removed from the vehicle, electrically drive
the actuator to the mid-position to assist in assembly.
1. If reinstalling an actuator removed from the vehicle, align the arrow (1) on the actuator housing with the line on the actuator coupling (2).