S-Type (X200) V8-4.0L (AJ28) (2001)
/v8-4.0l_(aj28)/Page-580005.png)
Warranty Information
Action
Complete a customer questionnaire and the check sheets to help assist in the identification of a drivability/stalling issue. The questionnaire and check
sheet is a 3-page document; 1-page customer questionnaire and a 2-page Workshop Procedure/diagnostic check sheet. A copy of the forms are shown in
this bulletin. The following information take the technician through the check sheet in more detail by section.
It is vital that the customer is lead through the questionnaire with the service advisor and that the dealer technician completes every stage of the
diagnostic check sheet.
Note:
If the dealer technician finds a fault/error in the early stages of the check sheet, it is mandatory that the remainder of the check sheet be
completed.
1.
Connect the WDS to the vehicle's DLC and select the PCM data read application. Select the tab with the car with the wrench. From the Vehicle
Configuration Main Menu, select Special Applications, then select Powertrain control module data read application.
1.2
Record value 0x094d, as shown in Illustration 1.
1.2
Record value 0x094e, as shown in Illustration 2.
2.
In the luggage compartment:
