S-Type (X200) V8-4.0L (AJ28) (2001)
/v8-4.0l_(aj28)/Page-1285001.png)
Seat Belt Buckle: Service and Repair
Front Safety Belt Buckle
Front Safety Belt Buckle
Removal
1. Remove the front seat.
2. Disconnect the safety belt buckle electrical connector.
3. NOTE: The safety belt buckle retaining bolt is part of the safety belt buckle and should not be separated.
Remove the safety belt buckle.
Installation
1. To install, reverse the removal procedure.
-
Tighten to 40 Nm.
