S-Type (X200) V8-4.0L (AJ28) (2001)
Seat Heater Switch: Service and Repair
Seat Control Switch (86.75.23)
Removal
1. CAUTION: Make sure that all trim panels are protected when removed from vehicle.
Disconnect the battery ground cable.
2. Remove the seat adjustment switches.
3. Remove the seat outer trim panel.
1. Remove the screws.
2. Remove the trim panel.
4. Disconnect the lumbar support seat switch electrical connector.
5. Detach the seat adjustment switchpack.
6. Remove the seat adjustment switchpack.
-
Disconnect the electrical connector.