S-Type (X200) V8-4.0L (AJ28) (2001)
/v8-4.0l_(aj28)/Page-1043003.png)
10.
Reconnect control module electrical connectors.
11.
Reinstall satellite navigation support bracket.
12.
Reinstall satellite navigation control module.
13.
Reconnect battery and reset all customer preferred settings noted in step 4.
14.
Refit luggage compartment carpet.
15.
Remove fender protector covers and close luggage compartment.
16.
Verify that JTP759 issue 11 or later is installed, and connect the WDS to the vehicle.
17.
Complete module configuration program using the WDS.
18.
Once reprogramming is complete, disconnect the WDS from vehicle.
19.
Place a call to the ATX center to verify system operation.
VEHICLES NOT AFFECTED BY THIS SERVICE ACTION