S-Type (X200) V8-4.0L (AJ28) (2001)
/v8-4.0l_(aj28)/Page-1102001.png)
Front Steering Knuckle: Service and Repair
Wheel Knuckle
Removal
1. Remove the brake disc shield. For additional information, refer to Brakes and Traction Control.
2. CAUTION: Prevent the tie-rod end ball joint ball pin hexagon from rotating. Failure to do so may result in damage to the tie-rod end ball joint
boot.
Detach the tie-rod end from the wheel knuckle.
3. CAUTION: Prevent the lower ball joint ball pin hexagon from rotating. Failure to do so may result in damage to the lower ball joint boot.
Remove the lower ball joint retaining nut.
