S-Type (X200) V8-4.0L (AJ28) (2001)
/v8-4.0l_(aj28)/Page-1102003.png)
2. CAUTION: Prevent the upper ball joint ball pin hexagon from rotating. Failure to do so may result in damage to the upper ball joint boot.
Attach the wheel knuckle to the upper ball joint.
^
Tighten to 90 Nm.
3. CAUTION: Prevent the lower ball joint ball pin hexagon from rotating. Failure to do so may result in damage to the lower ball joint boot.
Install the lower ball joint retaining nut.
^
Tighten to 150 Nm.
4. CAUTION: Prevent the tie-rod end ball joint ball pin hexagon from rotating. Failure to do so may result in damage to the tie-rod end ball joint
boot.
