S-Type (X200) V8-4.0L (AJ28) (2001)
/v8-4.0l_(aj28)/Page-1160003.png)
13.
Install and fully tighten the stabilizer bar securing bolts to 55 Nm (Illustration 4).
Note:
Left-hand side shown; right-hand side similar.
14.
Install the water control valve and bracket, install and tighten securing bolts (Illustration 5).
15.
If installed, install the generator cooling duct.
16.
Install the radiator splash shield, install and tighten securing screws (Illustration 6).
