S-Type (X200) V8-4.0L (AJ28) (2001)
Stabilizer Bushing: All Technical Service Bulletins
Suspension - Revised Stabilizer Bushing R & I
S204-13
DATE
04/05
S-TYPE
MODEL
2000-02 MY
S-TYPE
VIN
L00001-M44997
Remove/Install Front Stabilizer Bushings -
New Labor Time Allowance -
Repair Procedure
Issue:
This Technical Bulletin has been issued for information only, to inform dealers of a change in the Labor Time allowance to remove/install the front
stabilizer bushings. As part of continual reviews and quality checks several errors have been discovered in the original warranty time calculations related
to stabilizer bushings remove/install and the water control valve and mounting bracket. This time has now been validated on both latest and original level
vehicles and the times corrected.
Action:
To remove/install the front stabilizer bushings, follow the Service Instruction outlined below.
1.
Open hood and install fender protection covers.
2.
Raise vehicle on "twin post" ramp.
3.
Remove the radiator splash shield (Illustration 1).
4.
If installed, displace and remove the generator cooling duct.