S-Type (X200) V8-4.0L (AJ28) (2001)
5.
Detach and reposition the water control valve and mounting bracket (Illustration 2).
6.
Remove the stabilizer bar securing bolts (Illustration 3).
Note:
Left-hand side shown; right-hand side similar.
7.
Displace and remove the stabilizer bar mounting bracket upper caps.
8.
Displace and reposition the stabilizer bar.
Note:
Note orientation of the stabilizer bar mounting bushings.
9.
Displace and remove the stabilizer bar mounting bushings.
10.
Noting orientation, install the new stabilizer bar bushings to the stabilizer bar.
11.
Reposition the stabilizer bar to the mounting brackets.
12.
Install and fully seat the stabilizer bar upper mounting bracket caps.