S-Type (X200) V8-4.0L (AJ28) (2001)
8. Displace and reposition the stabilizer bar.
Note: Note orientation of the stabilizer bar mounting bushings.
9. Displace and remove the stabilizer bar mounting bushings.
10. Noting orientation, install the new stabilizer bar bushings to the stabilizer bar.
11. Reposition the stabilizer bar to the mounting brackets.
12. Install and fully seat the stabilizer bar upper mounting bracket caps.
13. Install and fully tighten the stabilizer bar securing bolts to 55 Nm (Illustration 4).
14. Install the water control valve and bracket, install and tighten securing bolts
15. If installed, install the generator cooling duct.