S-Type (X200) V8-4.0L (AJ28) (2001)
/v8-4.0l_(aj28)/Page-907006.png)
32.
Align marks on the TR sensor (Illustration 8).
33.
Final tighten the TR sensor securing screws to 10 Nm.
34.
Connect the TR sensor electrical connector.
35.
Disconnect the Intermediate Shaft Speed (ISS) sensor electrical connector (Illustration 9).
36.
Remove the ISS sensor securing screw, and remove the ISS sensor.
37.
Install the new ISS sensor; install and tighten the securing screw to 10 Nm.
