S-Type (X200) V8-4.0L (AJ28) (2001)
/v8-4.0l_(aj28)/Page-922004.png)
Flange Remover/Replacer Forcing Screw
Removal
1. Remove the driveshaft.
2. Remove the pinion flange nut.
^
Match mark the pinion nut to the pinion flange.
^
Loosen the pinion flange nut 180°.
^
Tighten the pinion flange nut to the match mark. Note the force required to tighten to the match mark.
^
Remove the pinion flange nut.
