S-Type (X200) V8-4.0L (AJ28) (2001)
6. CAUTION: When installing the windshield, do not strike it in any way as this will crack the glass.
Install lifting and with assistance, carefully position windshield in aperture aligning glass and press firmly into place.
7. Remove the lifting handles.
8. Remove protective tape from leading edge of headlining.
9. NOTE: Left-hand electrical connector shown, right-hand similar.
Reconnect heated windscreen electrical connector.
10. Install the A pillar trims.
11. Install the interior mirror.
12. Install the lower A pillar drainage channel.