S-Type (X200) V8-4.2L (2005)
Muffler: Service and Repair
Rear Muffler (30.10.52)
Muffler and Tailpipe (30.10.52)
Removal
1. Raise and support the vehicle.
2. Loosen the muffler and tailpipe retaining clamp.
3. Detach the muffler and tailpipe hanger insulator.
4. Remove the muffler and tailpipe.
Installation
CAUTION: The hanger insulators are constructed of a special material. Use only the correct specification insulators.
NOTE:
-
Check the hanger insulators for damage or fatigue. Install new hangers if required.
-
Make sure the muffler and tailpipe is central in the bumper aperture.
1. To install, reverse the removal procedure.
-
Tighten to 55 Nm.