S-Type (X200) V8-4.2L (2005)
Flywheel: Service and Repair
Flywheel (12-53-07)
Removal
1. Remove the clutch disc and pressure plate.
2. Detach the accessory drive belt.
^
Rotate the belt tensioner counter-clockwise.
-
Use a 3/8 inch square drive bar to rotate the belt tensioner.
^
Detach the accessory drive belt.
3. Install the special tool.
4. NOTE: Prevent the flywheel from rotating.
Remove the flywheel.
Installation
1. NOTE: Make sure the crankshaft and flywheel mating faces are clean before installation.