S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-1921010.png)
9. Remove protective tape from around the leading edge of the headlining.
10. Remove the protective sheet and the protective board from the fascia.
11. Install the lower A-pillar drainage channels.
12. Install the cowl vent screen.
13. Install both A-pillar windshield mouldings.
14. NOTE: Right-hand shown, left-hand similar.
Reconnect the heated windshield electrical connector.
15. Install the overhead console.
16. Install the sunvisors.
17. Install both A-pillar trim panels.
18. Install the interior mirror.
