S-Type (X200) V8-4.2L SC (2003)
/v8-4.2l_sc/Page-798003.png)
4. NOTE: If the same brake disc is to be installed, the tip of a hub must be marked with a corresponding part of the brake disc for alignment.
Remove the brake disc.
^
Remove and discard the brake disc retaining clips.
Installation
1. To install, reverse the removal procedure.
Brake Disc Shield
Brake Disc Shield
Removal
1. Remove the brake disc.
2. Remove the disc shield.
^
Drill out the rivets.
Installation
1. To install, reverse the removal procedure.
^
Install new rivets.
