S-Type (X200) V8-4.2L SC (2003)
13. Remove the power steering pump lower retaining bolts.
14. Lower the vehicle.
15. Detach the accessory drive belt.
1. Rotate the accessory drive belt tensioner counter-clockwise.
^
Use a 3/8 inch square drive bar to rotate the accessory drive belt tensioner.
2. Detach the accessory drive belt.
16. CAUTION: Cap the power steering lines to prevent loss of fluid and dirt ingress.
^
CAUTION: If power steering fluid comes into contact with the paint work, the affected area must be immediately washed down with cold
water.
NOTE: Drain the fluid into a suitable container.
Disconnect the power steering pump to steering gear pressure line.
^
Remove and discard the O-ring seal.