jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Rear Door Panel > < Front Door Window Motor|Service and Repair
Page 1
background image

Rear Door Interior Handle: Service and Repair

RENEW

- Remove the rear door trim pad veneer panel.  See: Front Door/Front Door Panel/Service and Repair

- Disconnect the inner cable (Fig. 1) from the door handle and displace the outer cable to handle assembly securing sleeve.

- Disconnect the cable from the handle assembly, operate the handle for access, remove the screw and bolt securing the handle assembly, remove and

discard the handle.

- Fitting is the reversal of this procedure.

Rear Door Panel > < Front Door Window Motor|Service and Repair