Sovereign L6-4.0L (1991)
^
Hold handle as in fig. 4 and carefully extract the lock barrel assembly and steel roller (fig. 4 A) from its housing.
^
Remove the shutter assembly, (fig. 4 B).
The lock barrel should be kept assembled so that it can be used as a checking reference when assembling the replacement kit.
DOOR LOCK ASSEMBLY:
^
Select new discs and spacers from the kit and arrange them in order according to the key cut sequence.
^
Assemble discs and spacers into the new lock barrel supplied with the kit (Fig. 5). As each disc/spacer is installed, apply a small amount of grease
(supplied in the kit) to the face of the discs/spacers.
^
The single spring spacer should be installed between the last two discs installed in the lock barrel, (fig. 5 C).
^
Align discs and spacers so that the steel roller fits into the lock barrel, (fig. 5 A and B).
^
Lubricate and install new shutter assembly into the lock barrel. Lubricate and install the steel roller into the lock barrel, (fig. 5 A). Install the lock
barrel assembly into the lock housing.
^
Install the lock barrel retention circlip. Reassemble the lock using new parts which are supplied in the kit.
