Sovereign L6-4.0L (1991)
Shift Cable: Adjustments
1.
Remove ashtray and disconnect sport mode switch electrical connector.
2.
Remove console panel wing nuts, then selector surround and veneer trim panels.
3.
With selector in N position, loosen selector cable rear adjustment locknut. Turn locknuts at both ends to extreme adjusting point.
4.
Working under vehicle, remove cable ball pin from selector lever.
5.
Ensure selector lever is in N position and connect ball pin to lever.
6.
Adjust cable nuts so selector lever freely engages N position notch.
7.
Tighten rear locknut, connect sport mode connector and install trim panels.
