Vanden Plas L6-3.6L (1988)
12.
Refit the microswitch to the fan speed control switch as shown in Illustration 9 using the hardware from the kit.
NOTE:
The screws and flat washers must be fitted from the microswitch side of the assembly as shown in Illustration 9.
13.
Fit the fan speed control switch to the control panel using the existing nut and washer.
14.
Refit the rear cover panel using the original screws. Install the fan speed control knob to the spindle.
15.
Reassemble and install the center console facia assembly.
16.
Connect the battery ground cable and code the radio and security system.
17.
Reset the clock and program the preset radio stations.
18.
Verify climate control, radio and security system operation.
PARTS INFORMATION:
PART NUMBER
DESCRIPTION
JLM 11238
Anti-vibration screw kit
JLM 11240
Microswitch replacement kit
WARRANTY INFORMATION
