Vanden Plas L6-4.0L (1990)
Front Door Window Glass: Service and Repair
RENEW
- Disconnect vehicle battery earth.
- Remove the front door trim pad veneer panel. See: Front Door Panel/Service and Repair
- Remove the front door upper trim pad.
- Remove the front door lower trim pad.
- Fit tape (1, Fig. 1) over the door glass (2, Fig. 1) and frame (3, Fig. 1) to secure the glass.
- Remove the screws securing the window lift motor to the door frame.
- Remove the screws securing the window regulator lift guide.
- Disconnect the exterior mirror and regulator multi plug connectors.
- Disconnect the window lift mechanism from the door glass.
- Lower the window lift motor to the bottom of the door and displace the channel rubber from the front channel for access to the securing screw.
- Remove the screw (Fig. 2) securing the door glass frame to the front mounting bracket Remove the screws (Fig. 2) securing the door glass frame to the
door, remove the spacer plate and remove the door glass and frame assembly, remove the tape from the glass and remove the glass from the frame.
