Vanden Plas L6-4.0L (1990)
Compressor Clutch: Service and Repair
Clutch
Compressor Clutch
Removal
NOTE: All the clutch service operations must be performed on a bench, and the following procedures strictly adhered to. The clutch includes a
counter-weight on the front plate to improve dynamic balance.
1. Install service tool JD146 to the clutch front plate.
2. Fit the center bolt assembly, and position the holding shaft into the center bolt assembly locating hole.
3. Align the puller center bolt to the compressor shaft. Finger tighten the three puller bolts into the threaded holes.
4. Turn the center bolt clockwise until the front plate is loosened. Remove the plate and the shaft key.
