Vanden Plas L6-4.0L (1990)
Evaporator Temperature Sensor / Switch: Service and Repair
Evaporator Temperature Sensor
Removal
1. Open the bonnet and disconnect the battery earth lead.
2. Remove the right hand dash liner.
3. Displace the wiring harness for access.
4. Remove the screws securing the sensor.
5. Disconnect the sensor multi-plug connector.
arefully withdraw the sensor from its location. Remove and discard the gasket.
Installation
-
Installation is the reverse of the removal procedure.
-
Ensure a new gasket is fitted.
-
Use service tool No JD 122 to carefully insert the sensor probe into the evaporator.
