jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Instrument Pack Illumination/Warning Bulbs, Renew|Page 1020 > < Malfunction Indicator Lamp|Description and Operation
Page 1
background image

Malfunction Indicator Lamp: Service and Repair
Instrument Pack Illumination/Warning Bulbs, Renew

INSTRUMENT PACK ILLUMINATION BULBS 

RENEW 

NOTE: The following five instrument pack bulbs (located in the lower right hand corner area of the pack) are accessible without removing the pack:

1  Seat belt warning bulb.
2  Boot open warning bulb.
3  Door open warning bulb.
4  Coolant temperature warning bulb.
5  Low coolant warning bulb.

NOTE: There are 8 white bulb/holders for gauge illumination, the remaining 24 brown bulb/holders are for warning indication only, the two types are

not inter-changeable).

All other warning bulbs, proceed as follows:

Disconnect the battery.
Remove the driver's side dash liner securing screws, release the securing clip, and remove the liner. 
Release the steering column clamp. fully extend the steering wheel, and re-tighten the clamp. 
Remove the instrument pack assembly securing screws. 
Disconnect the block connectors from the rear of the pack.
Displace and remove the instrument pack assembly.

Place the pack face down on the bench, ensuring that the cowl/lens is protected with a suitable cloth or similar.

NOTE: To minimize the risk of damage and contamination, all repairs conducted on the Instrument Pack should be performed in a non-static dust-free

environment.

Fig 1

Fig 2

Instrument Pack Illumination/Warning Bulbs, Renew|Page 1020 > < Malfunction Indicator Lamp|Description and Operation