Vanden Plas L6-4.0L (1990)
Control Module: Description and Operation
Transmission Control System
PURPOSE
Decoder module informs the engine management ECM when either "P" or "N" is selected. The input is used by the ECM to make adjustments required
to compensate for engine load changes that occur when "P" or "N" are engaged or disengaged.
OPERATION
A cable operated rotary switch (neutral safety switch) converts gear selections into electrical signals transmitted to transmission ECM and decoder
module. Module informs engine management ECM when either "P" or "N" is selected.
LOCATION
Mounted on side of transmission.