Vanden Plas L6-4.0L (1990)
Ignition Cable: Testing and Inspection
Ignition Wires
1.
Remove ignition wires from engine.
2.
Measure resistance of each wire. Readings should be:
No.
1 ........................................................................................................................................................................................................ 5.6k to 13.2k ohms
2 ........................................................................................................................................................................................................ 6.0k to 14.0k ohms
3 ........................................................................................................................................................................................................ 6.6k to 15.5k ohms
4 ........................................................................................................................................................................................................ 7.7k to 18.2k ohms
5 ........................................................................................................................................................................................................ 9.5k to 22.3k ohms
6 ........................................................................................................................................................................................................ 9.1k to 21.4k ohms
Coil lead ............................................................................................................................................................................................ 1.8k to 4.1k ohms
