Vanden Plas L6-4.0L (1990)
Intake Air Temperature Sensor: Testing and Inspection
The Intake Air Temperature Sensor (IATS) should be tested in air.
The temperature of the component should be measured with an accurately calibrated thermometer, make sure that the temperature of the component has
stabilized. Using a DMM set to ohms measure the resistance across the connector blades.
Temperature Chart
Compare the reading obtained to chart; the resistance should be within the band.
If the reading falls outside the band, recheck temperature and resistance measurement. Check each pin to the component case, the resistance should be
very high (infinity).
Reject components which fall outside of the tolerance.
