Vanden Plas L6-4.0L (1990)
For vehicles 1993 MY on, use only Jaguar specification two piece, clip- on wheel weights (Illustration 1).
5.
Install required wheel weights and recheck balance.
Two Piece, Clip-on Wheel Weight Installation Procedure:
NOTE:
This procedure is demonstrated in the XJS Range 0994 Model Year Update video tape at 8 minutes and 45 seconds from the beginning of the
program.
1.
Compress the inflated tire at the bead, and the shoulder with compression tool HAW 900 (Illustration 2).
NOTE A:
Inner edge of compression tool must be placed close to rim.
NOTE B:
Outer swivel foot of compression tool must be placed onto shoulder of tire.
2.
Insert the wheel weight clip between the tire bead and the road wheel as shown in Illustration 3. Release the compression tool.
3.
Spread the wheel weight clip using the two piece clip tool HAW 900/i. Slide the weight under the clip. Ensure that the weight is fully seated.
4.
Recheck balance.
TOOL INFORMATION:
Tool Number
Description
HAW 900
Compression tool
HAW 900/1
Two piece clip tool
