Vanden Plas L6-4.2L (1982)
Brake Rotor/Disc: Service and Repair
Rear Disc
REMOVE
1.
Raise car on lift and remove wheel.
2.
Remove handbrake caliper. Refer to Brakes and Traction Control/Brakes/Parking Brake System/Parking Brake/Service and Repair.
3.
Remove caliper. Refer to Brakes and Traction Control/Brakes/Disc Brake System/Brake Caliper/Service and Repair.
Radius Arm Mounting
4.
Loosen upper safety strap bolt.
5.
Remove safety wire securing radius arm mounting bolt and remove bolt.
Where To Put Punch
6.
Remove radius arm from mount with an air hammer with a 3/8" flat punch, or equivalent. Direct punch straight in against body part of mount.
Rear Suspension
7.
Remove rear lower shock mounting nut. Do not remove shaft at this time.
Axle Flange Nuts
