Vanden Plas L6-4.2L (1982)
Figure 11
-
Remove the bolts (1, Fig 11) securing the front main bearing cap and manoeuvre the cap clear Discard the bearing shells.
REFIT
-
Liberally coat the replacement bearing shells with clean engine oil and locate the shells in the crankcase and bearing cap.
-
Ensure that the lugs on the bearing shell locate correctly.
-
Secure the bearing cap, using the bolts and new flat washers.
-
Tighten the bolts to the correct torque.
-
Refit the oil pump and pipes (1, Fig 8)