Vanden Plas L6-4.2L (1982)
Power Window Switch: Service and Repair
Removal and Installation
Remove and Refit
To remove L.H. front (1), R.H. front (2), R.H. rear (3), L.H. rear (4) or the master window lift switch (5, Fig. 34):
- Disconnect the battery.
- Remove the screw securing the console.
- Raise the cover and disconnect the cigar light cables (6, Fig. 34).
- Tilt the control panel and disconnect the harness block connector from switch.
- Depress the plastic lugs on the switch and remove the switch.
- When refitting reverse the above procedure.