Vanden Plas L6-4.2L (1982)
Ignition Switch Lock Cylinder: Service and Repair
Removing
- Remove the steering column lower shroud.
- Adjust the steering wheel to maximum travel, disconnect the fibre optic strand and remove the ignition switch shroud.
- Remove the shear bolts securing the lock assembly and displace the assembly from its mounting position.
- Remove the screw securing the lock assembly to the switch, displace the plastic cover and remove the steering column lock.
- To fit the new lock reverse the removal procedure.
NOTE: If lock is to be returned to manufacturer under warranty, include key number on material return label.
