Vanden Plas L6-4.2L (1982)
Wheel Bearing: Service and Repair
FRONT HUB BEARINGS AND GREASE SEAL
Remove and refit
Removing
-
Remove front hub assembly. See: Wheel Hub
-
Extract grease seal (1).
-
Withdraw inner bearing race (2) if necessary
-
Drift bearing cups (3) from hub. grooves are provided in the abutment shoulders for this purpose
Refitting
-
Tap replacement cups into position. ensuring that they are seated square to abutments, if bearings have been removed.
-
Lubricate large bearing race and fit to cup.
-
Fit new grease seal. using suitable bell-piece and tapping seal squarely into position.
-
Replace front hub assembly and road wheel.