Vanden Plas L6-4.2L (1982)
Power Window Switch: Service and Repair
Driver's Side Window Switch
RENEW
- Disconnect the battery earth lead.
- Remove the front door armrest. See: Body and Frame/Interior Moulding / Trim/Arm Rest/Service and Repair
- Remove the front door lower trim pad for access. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and
Repair
- Remove the front door pocket.
- Displace and remove the window lift switch assembly end cover trim pad (Fig. 1).
- Remove the veneer panel to lift switch securing screw (Fig. 1).
- Remove the veneer panel from the forward securing clip (Fig. 1).
- Remove the switch assembly securing nuts and screws.
- Remove the switch assembly from the door pocket.
- Fitting a new front door window switch (driver's side) is a reversal of the removal procedure.
