Vanden Plas L6-4.2L (1982)
Wiper Motor Linkage: Service and Repair
Windscreen Wiper Rack Drive
Remove and Refit
Windscreen Wiper Rack Drive
1. Remove the battery.
2. Remove the wiper arms and blades from the spindles.
3. Remove the hood cable bracket nuts and bolts.
4. Remove the wiper motor cover.
5. Remove the gear cover-plate by withdrawing the hexagon-head screws (1) Remove the link arm by removing the retaining clip and washer (2).
6. Maneuver and withdraw the rack drive cable (3).
7. To refit, grease and insert the rack into the tube, turning the wheelbox spindles to enable the rack to be just right home.
8. Align the rack with the link arm and fit the link arm.
9. Continue to refit by reversing the above instructions.
