Vanden Plas (X300) L6-4.0L (AJ16) (1996)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Damper / Pulley Assembly, Renew
-
Remove the air conditioning compressor drive belt.
-
Remove the generator drive belt.
-
Fit Service Tool 18G 1437(1 Fig. 1)to the crankshaft pulley (3 Fig. 1) and tighten the securing bolts (2 Fig. 1).
-
Wedge the tool against the crossmember.
-
Remove the pulley retaining bolt.
-
Remove Service Tool 18G 1437 from the pulley.
-
Fit Service Tool 18G 1436/A to the pulley and tighten the securing bolts.
-
Tighten the center bolt to withdraw the pulley from the crankshaft and remove the tool.
-
Remove the timing plate securing bolts and remove the timing plate.
-
Fit the timing plate to the new pulley and tighten the securing bolts.
-
Fit the pulley to the engine, hand tighten the securing bolt and fit Service Tool 18G 1437.
-
Wedge the tool against the front crossmember, torque tighten the securing bolt and remove Service Tool 18G 1437.
-
Refit the generator drive belt.
-
Refit the air conditioning compressor drive belt.