Vanden Plas (X300) L6-4.0L (AJ16) (1996)
Control Module: Service and Repair
TRANSMISSION CONTROL MODULE, RENEW
-
Raise the trunk lid and disconnect the battery.
-
Remove the passenger side dash liner for access.
-
Displace and remove the air conditioning footwell outlet duct.
-
Release and remove the footwell carpet securing fastener; displace and reposition the carpet for access.
-
Release the Transmission Control Module (TCM) bracket to body bracket securing nut (1 Fig. 1).
-
Displace the TCM mounting bracket tang (2 Fig. 1) from the body bracket and mounting stud.
-
Reposition the TCM, release the TCM multi-pin plug lever lock and disconnect the multi-pin plug (3 Fig. 1).
-
Release and remove the TCM mounting bracket securing bolts and remove the TCM.
-
Fit and align the new TCM to the mounting bracket.
-
Fit and tighten the TCM securing bolts.
-
Connect the TCM harness multi-pin plug and secure the multi-pin plug lever lock.
-
Position the TCM to body mounting bracket, ensuring that the tang locates in the bracket slot and stud.
-
Fit and tighten the TCM securing nut.
-
Position the footwell carpet and fit the carpet fastener.
-
Fit and align the footwell outlet duct to air conditioning unit.
-
Position and fit the duct fastener to the blower motor slot.
-
Refit the dash liner.
-
Reconnect the battery.